Filter
Top Products
3
Fitting the Lower Handle to the Lawnmower
1. Feed the hook (A2) attached to the lower handle
(A1) halfway through the centre slot of the guide
(A3), in the direction indicated by the arrow (A4).
2. Maintaining the hook (A2) in the centre slot of the
guide (A3) turn the lower handle (A1) clockwise
through 90
0
to place both legs of the lower handle in
position between the hood brackets (A5).
3. Insert the pins (B1) and secure with the retaining
clips (B2).
Fitting the Upper Handle to the Lower Handle
BEFORE
fitting the upper handle to the lower handle,
stabilize the lower handle by lifting the hook (C1) to the
'parking' position (C2).
1. Ensure the Choke Control Lever is on the left hand
side when viewed from the rear.
2. Align the lower and upper handle (See fig D).
Locate the bolts (D1), washers (D2) and secure with
the handle knobs (D3).
3. Fit the cables to the handles with the cable ties pro-
vided, making sure the cables are not trapped
between the upper and lower handles.
Assembly (without wheels)
D
A
90
0
B
1
2
3
5
4
1
2
3
C
1
3
2
1
2