Filter
Top Products
4
KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCHER.
Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the
operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury
to yourself and others. Save this manual for future reference.
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in
severe eye damage. Always wear safety glasses or eye shields before starting your tractor and while
mowing. We recommend wide vision safety mask for over the spectacles or standard safety glasses.
UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from carton.
• Fold flaps to inside of carton and turn carton upsidedown
on floor of work area. To protect grass catcher cover
during assembly place cover upsidedown on overturned
carton.
• Check carton contents against list. Be sure all parts are
there.
CARTON CONTENTS:
(2) Container Tops
(2) Container Bottoms
(1) Upper Chute
(1) Lower Chute
(1) Support Post
(1) Mounting Bracket
(1) Cover Assembly
(1) Cover Seal
(1) Bag of Parts
(1) Owner's Manual
NOTE: For ease of assembly, aside of your work area, lay out all hardware in the following groups. Each step of the assembly
instructions will identify the group needed for that step.
GROUP "A"
ASSEMBLY
LOCATION
HARDWARE SHOWN ACTUAL SIZE
BAG OF PARTS CONTENTS
GROUP "B"
GROUP "C"
REAR
MOUNTING
BRACKET
TO
DRAW BAR
(4) Shoulder Bolt 5/16 - 18 Self Tapping
SUPPORT
POST
TO
CONTAINER
SUPPORT
(3) Carriage Bolt 5/16 - 18 x 3/4
(3) Locknut 5/16-18
(4) Bolt 5/16 - 18 x 3/4
(4) Locknut 5/16-18
(1) Bracket Support Pin
(1) Retainer Spring
(3) Tubing End Caps
SUPPORT
POST
TO
MOUNTING
BRACKET