Filter
Top Products
MAINTENANCE
Husqvarna-33
Replacing the Fuel Filter
Replace the line-mounted fuel lter every 100 hours
(once per season) or more regularly if it is clogged.
To replace the lter:
Move the hose clamps away from the lter. Use 1.
at-nosed pliers.
Pull the lter loose from the hose ends.2.
Push the new lter into the hose ends. Position the 3.
lter with the “FLOW” arrow pointing up toward the
fuel pump. If necessary, a soap solution can be
applied to the lter ends to ease mounting.
Move the hose clamps back toward the lter.4.
8011-783
Check and clean the cooling air intake
8062-030
Remove the paper lter
Remove the wing nuts for the air lter and remove 1.
the paper lter.
Tap the paper lter against a xed surface to 1.
remove dust. If the paper lter is still dirty, it must
be replaced.
To ret - check that the seal on the bottom of the 2.
paper lter is whole and not compressed at.
Mount the paper lter in the air lter housing and 3.
tighten the wing nuts.
Ret the prelter on the paper lter.4.
Replace the cowling over the air lter housing. Do 5.
not over tighten the plastic fastener.
8062-031
Remove dust