Filter
Top Products
44 – English
Cleaning and Inspection
Clean and inspect all parts.
The thickness of the brake band must not be
under 0.8 mm at any point.
Assembly
Fit the band's fixed end into position on the
clutch cover.
All saws except 3120
3120
Continues on next page.
3120 continues on next page.
Fit the screw that holds the band's fixed end.
Grease the knee link and knock in the tubular
pin that holds the knee link.
SAFETY EQUIPMENT
Min. 0.8 mm
Eng, p 40-82 96-09-13, 10.1444