Filter
Top Products
ENGLISH -
DESCRIPTION
1 Upper handles
2 Lower handles
3 Fastening knobs for upper handles
4 Grass catcher
5 Safety button
6 Switch
7 Deck
8 Cable holder
9 Rear deector wall
10 Motor cover
11 Switch lever
12 Levers for adjusting the cutting height
13 Clutch lever
14 Gearbox
ASSEMBLY OF GRASS CATCHER
ASSEMBLY UPPER HANDLES
MULCHING CAP INSERTION (for the models where it is included only)
To cut the grass with the mulching system (no grass collection), lift the rear deector panel and insert the cap
by xing it with the spring as shown in the gure.
ADJUSTMENT OF CUTTING HEIGHT
l Always operate with the deector or grasscatcher in the correct position.
l Always stop the engine before removing the grasscatcher or adjusting the height of cut.
l Never place your hands or feet underneath the deck or into the grass discharge chute while
the engine is running.
SAFETY PRECAUTIONS
Before mowing, remove all foreign objects from the lawn
which may be thrown by the machine. While mowing,
stay alert for any foreign objects which may have been
missed.
Never lift the rear of the mower while starting the engine
or during normal operation.
Never place your hands or feet underneath the deck or into
the rear discharge chute while the engine is running.
ASSEMBLY LOWER HANDLES
ASSEMBLY DEFLECTOR (for the models where it is included only)
ADJUSTMENT OF HANDLES (for the models where it is included only)
ASSEMBLY WHEEL (for the models where it is included only)
3