Filter
Top Products
4 – English
E
!!
!!
!
N
R
EXPLANATION OF SYMBOLS
These symbols are on the machine and in the operator´s manual.
Study them carefully so that you know what they mean.
Read the operator´s manual.
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil pressure Cutting height Backwards Forwards Ignition Clutch
Use eye and hearing protection Clutch in Clutch out Parking brake Brake Warning
Sound level Warning! Rotating blades Warning! Risk that the machine can tip over Never drive across a slope
Never use the machine if persons, especially
children, or animals, are in the vicinity
Never carry passengers on the
machine or equipment
Keep hands and feet away
from under the hood when
the engine is running
Drive very slowly
without the cutting unit
European standard for
machine safety
Switch off the engine and take
off the ignition cable before
repairs or maintenance
Starting instructions
Read the instructions
Check the engine’s oil level
Lift up the cutting unit
Put the gear shift/hydrostat pedal
in neutral
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
850,970 Eng 97-10-14, 14.284