9
ASSEMBLY
4
CONTAINER INSTALLATION
Install containers on support frame, overlapping 1.
containers at center tube.
Note: One container should always overlap the
other container at the center tube.
Close cover and lock latch handle over support 2.
tubes.
Support
Frame
Latch Handle
WARNING!
DO NOT operate mower unless
container is properly installed.
Container is subject to wear and
deterioration, check containers
frequently, replace when cracked or
damaged. Use only a recommended
replacement container.
Raise and hold deector shield in upright position.1.
Fit lower chute as shown and hook rear latch to 2.
mower deck.
Align the bracket slot on lower chute with the 3.
deector bracket tab on the mower deck. Slide
chute down over tab.
With the lower chute in proper position, hold the 4.
chute securely while hooking the front latch to the
mower deck.
NOTE: Whilehookingthelatches,thedeector
shieldmaytrytopushthechuteawayfromthe
mowerdeckopening.Itisimportanttoholdthe
chuteinpositionwhilehookingthelatchesto
themowerdeck.
5
LOWER CHUTE INSTALLATION
Deector
Shield
Deector
Bracket
Tab
Rear Latch
Attach Rear Latch here
Front Latch