Husqvarna 525 88 56-01 Lawn Mower Accessory User Manual


  Open as PDF
of 17
 
7
UNPACKING INSTRUCTIONS
Remove all parts and packing materials from •
carton
Check carton contents against list. Be sure all •
parts are there.
TOOLS REQUIRED
½" Wrench (2)
9
/16" Wrench (2)
7
/16" Wrench (2) Ft/Lbs Torque Wrench
Drill ¼" and
5
/16" Drill Bits
9
/16" Socket and Ratchet
Standard Screwdriver
PARTS IDENTIFICATION
CONTAINER CONTENTS
2 - Soft bag containers 1 - Bag of Hardware
1 - Upper Chute 1 - Lower Chute
1 - Cover Assembly 1 - Mounting Hardware
1 - Weight
COVER ASSEMBLY
BAG CONTAINERS
LOWER CHUTE
NOTE:Whenrighthand(RH)andlefthand(LH.arementionedinthismanual,itmeanswhenyouare
seatedonthemowerintheoperator’sposition.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in “NEUTRAL” position.
• Turn ignition key “OFF” and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact
with plug.
UPPER CHUTE
 previous next