Filter
Top Products
WINTER USE
In winter, extreme cold and powdery snow can cause running prob-
lems.
The partition wall is prepared for cold working conditions. In the
partition wall there is a hole, that is covered by a lid (A) when
operating at normal temperatures,
In case of extreme cold, this lid shall be removed so that heated air
from the cylinder can flow into the carburetor space and prevent the
air filter from being iced up.
f NOTE!
Under normal temperature conditions the lid has to be
closed. Otherwise there is a certain risk of overheating the
chain saw.
e
,.’.
-.. .,,
.:..
. .....{. :,..
,.
.
%
For operating under winter conditions there is a special winter kit
available. This kit contains a rubber seal for mounting around the
fuel hose and a cover plate which has to be mounted on the right side
of the cylinder.
I
~ fl~~~normaltemperature conditions therubberseal and the
cover plate have to be removed. Otherwise the engine will be
overheated.
SAFETY REMINDERS
Handling
2. When cutting split wood, look out for ejecting wood pieces.
3. When buckina a felled tree on slor)ina around. alwavs stand
1.
2,
3.
4.
::
When transporting the saw, fit the chain protection.
-.,
Do not smoke when filling the fuel tank,
above the tre~.
Before cutting, fix the barking support properly.
4. Be calm and collected when working; eliminate the risk of
injury to other persons.
When usina the saw, keetI both hands on the handles.
Nobody is ~llowed to be within the swing area of the saw.
Always stop the enqine before checkina and adiustina the
Personal safety equipment
,-
chain tension or ex~hanging the chain.-
1. To protect the hearing organ, wear protective wad, plugs or
I
ear caps.
Procedure
2. When cutting, wear gloves of chrome leather.
3. When felling, wear a protective helmet.
1. When felling, always step aside from the falling tree and watch
4. Wear suitable clothes which do not hinder your work
out for falling branches.