Filter
Top Products
MAINTENANCE OF THE CHAIN SAW
3
....
0
.
4
10
14
13
Daily maintenance
Weekly maintenance
1.
2,
3.
4,
5.
6.
7.
8.
9.
Clean the saw body from the outside.
10. Check the starter, its cord and return spring
Clean the air filter. ”Change if necessary.
11. Clean the spark plug from the outside a“ndcheck the gap. Adjust
Turn around the guide bar, lower edge up. Clean the bar groove.
the gap or change the plug if necessary.
Clean the air intakes in the starter cover.
12. File off burrs if any on the sides of the guide bar.
Clean the cooling fins on the cylinder.
Clean the sDace under the clutch cover.
Sharpen the chain and check its tension.
Check the oiling system for the chain and the guide bar.
Monthly maintenance
Clean the chain brake. Make it a habit to release the chain brake
13, Wash out the fuel tank with petrol,
during pauses and transports.
14. Wash out the oil tank with petrol.
15. Clean the carburetor.
16. Clean the spark plug.
2
16 5
1
8
6 9
8