Filter
Top Products
CONTENTS
Content Page
Table of contents ………………………….. 2
Unpacking .................................................. 2
Transporting ............................................... 2
Introduction, personal safety ...................... 3
Registration of the product ………………… 4
General safety message ............................ 4
Safety warnings ......................................... 5
Excel series blades ................................... 6
Blade and skid plate installation ................ 6
What is what? ............................................ 7
Operating instructions ............................... 8
Generators and extension cords ............... 8
ProEdge blade installation ........................ 9
Using the ProEdge series blades ............. 9
Maintenance ……………………………..... 10
Maximizing the Soff-Cut system .......….... 10
Sawing contraction joints …………....…… 11
Troubleshooting ........................................ 11
Technical specications ............................ 12
Conformity certicates .............................. 12
Warranty ................................................... 13
Your 50 Handheld saw has been shipped from the factory
thoroughly inspected. The durable travel case contains the
50 saw, a blade shaft cover, a blade shaft wrench, an owner’s
manual, a part list, a warranty card, and a joint protector sam-
ple pack.
NOTE: No diamond cutting blade or skid plate is included
with the saw. Purchase the appropriate Husqvarna Excel
Series 5 inch blade from your local Husqvarna Construc-
tion Product dealer.
The 50 handheld saw weights approximately 9.0 pounds (4.1
kilograms) when ready to use . Use safe handling practices
when using the saw. Immediately clean the blade guard hous-
ing after each and every use to prevent concrete dust buildup.
Always remove the diamond blade when transporting the saw.
Fold the guide arm back and unscrew the handle from the
housing prior to storing in the carrying case.
UNPACKING
2
TRANSPORTING
Handle
Travel case