Husqvarna 36 Chainsaw User Manual


 
Maintenance
Tools and materials
The tools and material shown are absolutely essential for routine
everyday safe operation and maintenance of a chain saw.
T-wrench (A) This type of wrench or its equivalent should always
be carried with your chain saw. The wrench is neededto adjust
chain tension which must be correctly adjusted for safer cutting.
Small screwdriver (B) Used for carburetor adjustment.
Files - You need one round file (C) with file gauge (D) to sharpen
the cutting teeth of the chain and one flat file (E) and depth gauge
tool (F) for filing the depth gauge.
During winter time, powder snow and cold weather can cause
running problems, such as:
Too low engine temperature.
Icing on the air filter and carburetor.
Air filter “MEDIUM MESH” must be used,
I
I
I
Centrifugal cleaning
Centrifugal cleaning means the following:
All air to the carburetor is carried through the starter. Dirt and
dust is centrifuged away by the cooling fan.
IMPORTANT! In order to keep the function of the centrifugal
cleaning, a continous maintenance and care must be made.
o Clean the air intake to the starter, the fan wings of the
flywheel, the space around the flywheel, inlet pipe and
carburetor space.
r