Filter
Top Products
English – 3
CONTENTS
Contents
Key to symbols......................................................... 2
Safety instructions
Personal protective equipment ................................. 4
Chain saw safety equipment ...................................... 4
Inspecting, maintaining and servicing chain saw
safety equipment ................................................................. 8
Cutting equipment ......................................................... 10
How to avoid kickback................................................. 16
General safety precautions....................................... 18
General working instructions.................................... 19
What is what?
What is what? .................................................................... 24
Assembly
Mounting guide bar and chain ........................................... 25
Fuel handling
Fuelmix .............................................................................. 26
Fuelling .............................................................................. 27
Start and stop
Start and stop .................................................................... 28
Maintenance
Carburetor ......................................................................... 29
Starter device .................................................................... 30
Air filter .............................................................................. 31
Spark plug ......................................................................... 31
Muffler................................................................................ 31
Adjustment of the oil pump ................................................ 32
Cooling system .................................................................. 32
Daily maintenance ............................................................. 32
Weekly maintenance ......................................................... 33
Monthly maintenance ........................................................ 33
Technical Data
335XPT ............................................................................. 34
Emission Control Warranty Statement
Your warranty rights and obligations ................................. 35
Before using a new saw
• Read the instructions carefully.
• Check cutting equipment is correctly fitted and adjusted. See
page 25.
• Refuel and start the saw. Check the carburetor settings.
See pages 26-29.
• Do not use the saw until sufficient chain oil has reached the
chain, see page 14.
IMPORTANT! If the carburetor mixture is too lean it greatly
increases the risk of engine failure.
Poor maintenance of the air filter will cause carbon build-up on
the spark plug and lead to difficult starting.
If the chain is badly adjusted it will cause increased wear or
damage to the bar, drive sprocket and chain.
A chain saw is a dangerous tool if used
carelessly or incorrectly and can cause
serious, even fatal injuries. It is very important
that you read and understand these
instructions.
You will find the following
labels on your chain saw:
WARNING!
Under no circumstances may the design of
the machine be modified without the permis-
sion of the manufacturer. Always use genuine
spare parts/accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
Your warranty does not cover damage or
liability caused by the use of non-authorized
accessories or replacement parts.