Filter
Top Products
CONTENTS
English
–
3
Contents
Note the f
ollowing before
starting:
Please read the oper
ator’s manual carefully.
KEY
TO SYMBOLS
Symbols
................................................................ 2
CONTENTS
Contents
............................................................... 3
Note the following before starting: ........................ 3
INTR
ODUCTION
Dear Customer
, .................................................... 4
WHA
T IS WHAT?
What is what?
....................................................... 5
GENERAL SAFETY PRECA
UTIONS
Impor
tant .............................................................. 6
Personal protective equipment ............................. 6
Machine
′
s safety equipment ................................. 7
ASSEMBL
Y
Fitting the cutting head
......................................... 15
Fitting the bar and chain ....................................... 15
Adjusting the harness ........................................... 15
Filling with oil ........................................................ 16
Assembling and dismantling the two-piece shaft . 16
Fitting the impact guard ........................................ 16
Assembly of the saw attachment .......................... 17
FUEL HANDLING
Fuel saf
ety ............................................................ 18
Fuel ...................................................................... 18
Fuelling ................................................................. 19
ST
ARTING AND STOPPING
Chec
k before starting ........................................... 20
Starting and stopping ........................................... 20
W
ORKING TECHNIQUES
Gener
al working instructions ................................ 22
MAINTENANCE
Carb
urettor ........................................................... 25
Muffler .................................................................. 25
Cooling system ..................................................... 26
Spark plug ............................................................ 26
Two-piece shaft ................................................... 27
Air filter ................................................................. 27
Maintenance schedule ......................................... 28
TECHNICAL D
ATA
T
echnical data ...................................................... 29
EC-declaration of conformity ................................ 30
!
W
ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W
ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
W
ARNING! A pole saw is a dangerous
tool if used carelessly or incorrectly and
can cause serious, even fatal injuries. It
is extremely important that you read and
understand the contents of this
Operator’s Manual.