Filter
Top Products
English – 23
TECHNICAL DATA
325RJ-X
1,50/24,5
1,34/34
1,06/27
2 700
11 000-11 700
8 014
0,9 kW/ 9 000 rpm
Yes
Yes
Walbro MB 20
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,06/0,5
9.5/4,3
92/98
104/109
1,5/1,4
2,0/1,8
2,5/4,8
4,9/8,0
Technical data
Engine
Cylinder capacity, cu. in/cm
3
Cylinder bore, inch/mm
Stroke length, inch/mm
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and
guard, Lbs/kg
Noise levels
Equivalent noise pressure level at the
user’s ear, measured according to EN
31806 and ISO 7917, dB(A), min/max:
Equivalent noise power level at the user’s
ear, measured according to EN 31806
and ISO 10884, dB(A), min/max:
Vibration levels
Vibration levels on the handles,
measured according to EN 31806 and
ISO 7916, m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
NOTE!
Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted.
The table indicates the highest and lowest values.