Husqvarna 324L, 324LD Trimmer User Manual


 
22 – English
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
324Lx 324LDx
Engine
Cylinder displacement, cu.in/cm
3
1,53/25,0 1,53/25,0
Cylinder bore, inch/mm 1,38/35 1,38/35
Stroke, inch/mm 1,03/26 1,03/26
Idle speed, rpm 3100 3100
Recommended max. fast idle speed, rpm 11000 11000
Speed of output shaft, rpm 8300 8300
Max. engine output, acc. to ISO 8893, kW/ rpm 0,8 / 7000 0,8 / 7000
Catalytic converter muffler No No
Speed-regulated ignition system No No
Ignition system
Manufacturer/type of ignition system Ikeda Ikeda
Spark plug NGK CMR5H NGK CMR5H
Electrode gap, inch/mm 0,024/0,6 0,024/0,6
Fuel and lubrication system
Manufacturer/type of carburetor Walbro Walbro
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 5,1 11,9/5,4
Sound levels
(see note 1)
Equivalent sound pressure level at the users ear,
measured according to ANSI B175.3-1997, dB(A), min/
max:
90/97 90/98
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s
2
At idle, left/right handles, min.: 1,9/1,8 1,7/1,6
At idle, left/right handles, max.: 2,2/1,9 2,8/1,8
At max. speed, left/right handles, min.: 5,8/5,5 3,2/4,5
At max. speed, left/right handles, max.: 6,1/5,7 5,8/8,7