Filter
Top Products
2
–
English
KEY
T
O SYMBOLS
Symbols
W
ARNING! Incorrect or careless use of a
hedge trimmer can turn it into a dangerous
tool that can cause serious or even fatal
injury. It is extremely important that you
read and understand the contents of this
operator’s manual.
Please read the oper
ator’s manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
• Approved hearing protection
• Protective goggles or a visor
Cutting tool. Do not touch the tool without
first switching off the engine.
This machine is not electrically insulated.
If the machine touches or comes close to
high-voltage power lines it could lead to
death or serious bodily injury. Electricity can
jump from one point to another by arcing.
The higher the voltage, the greater the
distance electricity can jump. Electricity can
also travel through branches and other
objects, especially if they are wet. Always
keep a distance of at least 10 m between the machine and
high-voltage power lines and/or any objects that are touching
them. If have to work within this safe distance you should
always contact the relevant power company to make sure the
power is switched off before you start work.
This machine can be dangerous! The operator of the machine
must ensure, while working, that no persons or animals come
closer than 15 metres.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Other symbols/decals on the mac
hine refer to special
certification requirements for certain markets.
Switch off the engine b
y moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Alw
ays wear approved protective gloves.
Regular cleaning is required.
Visual chec
k.
Protectiv
e goggles or a visor must be worn.