Filter
Top Products
14 – English
STARTING AND STOPPING
Warm engine
Ignition:
Set the stop switch to the start position.
Choke:
Put the choke in working position.
Primer bulb:
Press the air purge repeatedly until fuel begins to fill the bulb.
The bulb need not be completely filled.
Starting
Hold the body of the machine on the ground using your left
hand (CAUTION! Not with your foot!). Grip the starter handle,
slowly pull out the cord with your right hand until you feel
some resistance (the starter pawls grip), now quickly and
powerfully pull the cord. Never wrap the starter cord around
your hand
Reset the choke control as soon as the engine starts
CAUTION!
Do not pull the starter cord all the way out and do not let go of
the starter handle when the cord is fully extended. This can
damage the machine.
Stopping
The engine is stopped by moving the stop switch to the stop
position.
OIL