Filter
Top Products
36 – English
Technical data
Engine
Cylinder capacity, cm
3
Cylinder bore, mm
Stroke length, mm
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Muffler fitted with catalytic converter
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litres
Weight
Weight without fuel, cutting tool andguard, kg
Noise levels
Equivalent noise pressure level at the user’s ear,
measured according to prEN 31806 and ISO
7917, dB(A), min/max:
Equivalent noise power level at the user’s ear,
measured according to prEN 31806 and ISO
10884, dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to prEN 31806 and ISO 7916, m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
265RX
65,1
48
36
2 250
11 500
9 120
3,0 kW/8 400 rpm
No
SEM GA 6CD
Champion RCJ 7Y
0,5
Tillotson HS
1,0
10,8
98/100
112/113
4,5/4,0
5,1/4,6
3,0/3,9
3,9/5,1
TECNICAL DATA
252RX
50,8
45
32
2 700
14 000
10 300
2,4 kW/9 000 rpm
No
EM/ET
Champion RCJ 7Y
0,5
Walbro HDA
0,8
8,9
96/103
110/111
2,8/2,8
4,5/3,9
1,2/1,4
1,6/1,7
250R
48,7
44
32
2 700
12 500
9 190
2,1 kW/9 000 rpm
No
EM/ET
Champion RCJ 7Y
0,5
Walbro HDA
0,8
9,2
98/104
110/113
3,4/3,9
4,4/4,0
1,2/1,7
2,2/2,6
NOTE!
The noise and vibration measurments are made with all for the machine approved cutting equipment.
The maximum and minimum values are stated in the table above.