Filter
Top Products
4 – English
KEY TO SYMBOLS
Symbol Description Location
Operator’s manual
Blower
Checks and/or
mainten-ance shall be
carried out after having
switched off the
engine. The stop
switch must be set to
the STOP position.
Cleaning at regular
intervals is required.
Approved protect
goggles or visor must
be worn.
Approved protect
goggles or visor and
ear protection must be
worn.
WARNING! The blower
can be dangerous!
Careless or improper
use can cause serious,
even fatal injury.
Read the operator’s
man-ual carefully and
make sure that you
understand the
contents before using
the blower.
WARNING! Make sure
that the inspection
cover is locked in the
closed position or that
the vacuum tube is
mounted on the blower.
Never touch the
impeller.
WARNING! The blower
may throw objects at
high velocity that can
ricochet and hit the
operator. This may
cause serious eye
damage.
Symbol Description Location
Blower
The blower operator
must make sure that no
bystanders or animals
come nearer than 10
metres. Whenever
several operators are
working in the same
work area, they should
maintain a safe
distance of at least 10
metres from one
another.
Choke.
Refueling.
Stop switch.
The manufacturer’s
warrantee for this
product meets safety
requirements according
to:
•The Machine Directive
•The EMC Directive
•The Low Voltage
Directive
Instructions on how to
open the inspection
cover.
Noise pressure level
measured at 15 metres
distance according to
ANSI B175.2-1996.
Operator’s manual
X
X
X
XX
XX
XX
XX
XX
X X
X
X
X
XX
X
X
70
dB (A)
per ANSI B175. 2-1996
Other symbols/decals on the machine refer
to special certification requirements for
certain markets.