English – 15
START AND STOP
Press the machine body against the ground using
your left hand (NOTE! Do not use your foot). Grip
the starter handle with your right hand and slowly
pull the starter cord out until you feel some
resistance, (the starter hooks grip) now quickly and
powerfully pull the cord.
Immediately press the choke control in when the
engine fires and repeat until the engine starts. When
the engine starts, quickly apply full throttle and the
start throttle will automatically disengage.
NOTE! Do not pull the starter cord out completely
and do not release the starter cord from the fully
extended position. This can damage the machine.
Stop
The engine is stopped by switching the ignition off
using the stop switch.