Filter
Top Products
En
g
lish – 39
TECHNICAL DATA
1)
As rated by the engine manufacturer
Rider 16 C
Dimensions
Length without cutting unit, mm/ft 2010/6,58
Length with cutting unit, mm/ft 2220/7,29
Width without cutting unit, mm/ft 880/2,89
Width with cutting unit, mm/ft 1114/3,65
Height, mm/ft 1070/3,52
Operating weight with cutting deck, kg/lb 249/549
Wheel base, mm/ft 855/2,8
Track width, front, mm/ft 715/2,37
Track width, rear, mm/ft 625/2,05
Tyre dimensions 165/60-8
Air pressure, rear - front, kPa / bar / PSI 60 (0,6/8,5)
Max. gradient 10°
Engine
Brand / Model Briggs & Stratton/31A6070113E1
Power
1)
, hp 15,5
Displacement, cm
3
/cu.in 502
Max.motor speed, r/min 2900 ± 75
Fuel, minimum octane grade lead-free 85
Fuel tank capacity, litre 10
Oil synthetic, class SJ-CF SAE 5W/30 or SAE 10W/30
Oil tank capacity, litre/USqt 1,4/1,5
Starting Electric starter
Electrical system
Type 12 V, negative earthed
Battery 12 V, 24 Ah
Spark plug EMS Q
Electrode gap, mm/inch 0,75/0,030
Main fuse Flat pin, 15 A.
Noise emissions and cutting width
Sound power level, measured dB(A) 96
Guaranteed noise level 100
Cutting width, mm 940/3,08
Vibration levels
Vibration level on the steering wheel, measured
according to EN 836:1997 / A2:2001, m/s
2
2,5
Transmission
Brand Tuff Torq K46
Oil, class SF-CC SAE 10W/30
Number of forward gears -
Number of reverse gears -
Forward speed, km/h. 0-9
Reverse speed, km/h 0-6
Cutting unit
Type 3-blade cover Combi 940 mm
Cutting heights, 7 positions, mm/inch 30-80 / 1,18-3,15
Blade length, mm/inch 360/14 3/16”