Husqvarna 128LDX Trimmer User Manual


 
English---3
545196777 Rev. 2 4/30/09
CONTENTS
Contents
KEY TO SYMBOLS
Symbols 2.........................
CONTENTS
Contents 3........................
Note the following before starting 3....
WHA T IS WHAT?
What is what? 4...................
GENERAL SAFETY PRECAUTIONS
Important 5........................
Personal protective equipment 5......
Machine’s safety equipment 6........
Cutting equipment 8.................
ASSEMBLY
Fitting the loop handle 9.............
Assembling and dismantling the
two--piece shaft 9...................
Fitting the trimmer guard and
trimmer head 10.....................
FUEL HANDLING
Fuel safety 11.......................
Fuel 11............................
Fuelling 12.........................
STARTING AND STOPPING
Check before starting 13..............
Starting and stopping 13..............
WORKING TECHNIQUES
General working instructions 15........
MAINTENANCE
Carburetor 17.......................
Muffler 17..........................
Spark plug 18.......................
Two--piece shaft 18..................
Air filter 18..........................
Bevel gear 19.......................
Maintenance schedule 20.............
TECHNICAL DATA
Technical data 21....................
EC--declaration of conformity
(Applies to Europe only) 22............
Note the following before
starting:
Husqvarna AB has a policy of continuous
product development and therefore
reserves the right to modify the design and
appearance of products without prior
notice. Long--term exposure to noise can
result in permanent hearing impairment.
Always use approved hearing protection.
WARNING: A clearing saw,
brushcutter or trimmer can be
dangerous if used incorrectly or
carelessly , and can cause serious
or fatal injury to the operator or
others. It is extremely important
that you read and understand the
contents of this operator’s manual.
WARNING: Under no circum-
stances may the design of the
machine be modified without the
permission of the manufacturer .
Always use genuine accessories.
Non--authorized modifications
and/or accessories can result
in serious personal injury or the
death of the operator or others.