Filter
Top Products
English---21
545196777 Rev. 2 4/30/09
TECHNICAL DATA
Technical data
128LDX
Engine
Cylinder displacement, cm
3
28
Cylinder bore, mm 35
Stroke, mm 28,7
Idle speed, rpm 2800--3200
Recommended max. fast idle speed, rpm 11000
Speed of output shaft, rpm 8000
Max. engine output, acc. to ISO 8893, kW 0,8
Catalytic converter muffler Yes
Speed--regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system Walbro/CD
Spark plug Champion RCJ--8Y
Electrode gap, mm 0,6
Fuel and lubrication system
Manufacturer/type of carburetor Zama
Zama
Fuel tank capacity, litre 0,4
Weight
Weight without fuel, cutting attachment and guard, kg 5,0
Noise emissions
(see note 1)
Sound power level, measured dB(A) 110
Sound power level, guaranteed L
WA
dB(A) 114
Noise levels
(see note 2)
Equivalent noise pressure level at the operators’ ear,
measured according to EN/ISO 11806 and ISO 22868,
dB(A), min./max. 93/96
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 1 1806 and ISO 22867
FRONT HANDLE
Idling, m/s
2
, min./max. 2,9/4,7
Racing, m/s
2
, min./max. 3,1/6,2
REAR HANDLE
Idling, m/s
2
, min./max. 1,9/2,6
Racing, m/s
2
, min./max. 5,5/8,4
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity
with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for
sound pressure levels under various working conditions with the following time distribution:
1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are mea-
sured with all the approved cutting attachments for the machine. The table indicates the
lowest and highest values.