Filter
Top Products
19
WORKING TECHNIQUES
Sweeping
S The fan effect of the rotating line can be
used for quick and easy clearing up.
Hold the trimm er line parallel to and
above the area to be swept and move
the tool to and fro.
S When cutting and sweeping you should
use full throttle to obtain the best results.
Cutting
S The trimmer is ideal for cutting grass that
is dif ficult to reach using a normal lawn
mower. Keep the trimmer line parallel to
the g round when cutting. Avoid pressing
the trimmer head against the ground as
this can ruin the lawn and damage the
tool.
S Do not allow the trimmer head to con--
stantly come into contact with the ground
during normal cutting. Constant contact
of this type can cause damage and wear
to the trimmer head.
W ARNING: Neither the operator
of the machine nor anyone else may
attempt to remove the cut material
while the engin e is runni ng or the
trimmer line is rotating, as this can
result in se rious injury. Stop the
engine and trimmer head before you
remove material that has wound
around the drive shaft as otherwise
there is a risk of injury . The bevel
gearcangethotduringuseandmay
remain so for a while afterwards. Y ou
could get burned if you touch it.
W ARNING: Wa tch out for thrown
objects. Always wear eye protection.
Never lean o ver the cutting attac h-
ment guard. Stone s, rubbish , etc.
canbethrownupintotheeyes
causin g blindness or serious i njury.
Keep unautho rized pe rsons at a di s-
tance. Children, animals, onlookers
and helpe rs should be kept outside
thesafetyzoneof15m.
Stopthemachineimmediatelyif
anyone ap proaches.