Filter
Top Products
English
15
ADJUSTING IDLE SPEED
- The idling speed is set for 2200 rpm at the factory. If it is necessary to
adjust the idle speed, use the adjustment screw on the top side of the
carburetor.
(1)Idling Adjustment Screw
STOPPING ENGINE
- Move the throttle lever to the STOP position.
(1)Stop
NOTE
If the engine does not stop when setting the ignition switch to the
stop position, close the choke lever and stop the engine.
In this case, please repair the machine at your nearest servicing
dealer.
(1)Choke Lever
(2)OPEN
(3)CLOSE
(1)
F14
F15
F16
(1)
(3)
(2)
Operation
150BT_US.fm Page 15 Friday, April 10, 2009 9:51 AM