Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in ser
ious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and mak
e sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicab
le EC directives.
Noise emission to the environment
according to the European Comm
unity’s
Directive. The machine’s emission is
specified in chapter Technical data and
on label.
Ignition;
choke:
Set the choke control
in the chok
e position. This should
automatically set the stop switch to the
start position.
Adjustment of the oil pump
Other symbols/decals on the mac
hine refer to special
cer
tification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y moving the
stop s
witch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
wo
rn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.