Filter
Top Products
12
45013-01 • 06/16/11 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8. Attach the extra pull chain (included) to the fan pull chain
using the plastic breakaway connector. (You may nd the plastic
breakaway connector on the end of the extra chain.)
7-9. read the fan pull chain through the hole in the light kit. en,
thread the fan pull chain through the hole in the metal disc.
7-10. read the light and fan pull chains through the hole in the center
of the glass bowl. en, thread the light pull chain throught the
hole in the center of the cover plate.
7-11. read the fan pull chain through the grommet hole on the side of
the cover plate.
7-12. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-13. read the light pull chain through the nial and screw the nial
onto the threaded rod end until tight.
Breakaway
Connector
Light Kit
readed Rod
Metal Disc
Glass Bowl
Cover Plate
Finial
Steps 7-9 – 7-13