Filter
Top Products
11
45013-01 • 06/16/11 • Hunter Fan Company
Lower Switch
Housing
Plug
Connector
Housing
Assembly Screw
Plug
Connector
Detail
Steps 7-6 – 7-7
CAUTION: e light source is designed for this specic
application and can overheat if serviced by untrained personnel.
If any servicing is required, the product should be returned to an
authorized service facility for examination or repair.
7-6. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in
the lower switch housing assembly.
Note: Both plug connectors are polarized and will only t
together one way. Make sure the connectors are properly
aligned before connecting them. Incorrect connection could
cause improper operation and damage to the product.
7-7. Place the lower switch housing assembly over the upper
switch housing. Align the side screw holes in the upper and
lower switch housings. Attach the lower switch housing
to the upper switch housing with three housing assembly
screws.
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)