Filter
Top Products
13
42606-01 • 06/27/11 • Hunter Fan Company
7-6. Remove the switch housing cap and plug button.
7-7. Insert the black wire and white wire from the light xture through
the hole in the bottom on the lower switch housing. Use the
included wire nut and washer to attach the light xture to the
lower switch housing. Securely tighten the nut and washer onto
the end of the light xture.
7-8. Insert and tighten two light xture mounting screws.
7-9. Remove the wire nuts from the two wires from the lower switch
housing. Use one wire nut to connect the black wire from the light
xture to the black/white wire from the lower switch housing. Use
the other to connect the white wire from the light xture to the
white wire from the lower switch housing.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
Switch
Housing
Cap
Plug Button
Step 7-6
Step 7-7
Step 7-8
Light Fixture
Mounting Screw
Lower
Switch
Housing
Washer
Nut
Lower Switch
Housing
Light Fixture
Assembly
Light Fixture
Mounting Screws
7 • Completing Your Installation With or Without a Light Fixture (Continued)