Filter
Top Products
15
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Light Kit (continued)
Connect the the 2-pin plugs from the
switch housing and the LED assembly.
Push excess wiring into the switch
housing through the wire slot.
Align the two screw screw holes and
install the switch housing assembly
screws, found in the hardware bag.
Wire Slot
Attach the LED assembly to the
switch housing by installing two light
assembly screws, found in the
hardware bag, through the slots, not
the screw holes.
Light
Assembly
Screw