Filter
Top Products
14
www.hunterfan.com.br
MD506-01 • 09/19/14 • © Hunter Fan Company
Light Kit (continued)
Make sure the light kit is securely attached to the mounting
plate. Failure to properly secure all three assembly screws
could result in the light xture falling.
Thread the 2-pin connector through the
wire slot in the the switch housing.
Wire Slot
Install the remaining attachment
screw to secure the light kit to the
mounting plate. Securely tighten all
three screws.
Attachment Screw
Connect the upper 9-pin plug connector
from the fan to the lower 9-pin plug
connector in the light kit.