Filter
Top Products
13
Light Kit
Partially install two of the light kit assembly
screws, found in the hardware bag, into the
upper switch housing. Lift the light kit assembly
and connect the plugs from the upper and
lower switch housings. Make sure to line up the
colored markings on the connectors.
Align the keyhole slots in the light kit assembly
with the two switch housing screws. Lift the
light kit assembly and twist counterclockwise
to lock into place. Thread the pull chains
through the holes in the light kit.
Install the third light kit assembly screw.
Tighten all three screws securely.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
switch housing screws could result in the light xture falling.
Light Kit
Assembly
Screw
www.HunterFanInternational.com
MB519-01 • 03/13/15 • © Hunter Fan Company