Filter
Top Products
www.HunterFanInternational.com
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing xture falling.
Switch Housing
Feed the wire plug through the center
hole of the upper switch housing, then lift
the keyhole slots around the screws and
twist counterclockwise.
Screw two switch housing assembly screws,
found in the hardware bag, halfway
into the motor housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in the
hardware bag, into place and then tighten
all three screws.
12
MB519-01 • 03/13/15 • © Hunter Fan Company