Filter
Top Products
8
5 • Installing the Canopy and Canopy Trim Ring
Step 5-2
Canopy Trim
Ring
Canopy
Ceiling Plate
Canopy
Screw
Steps 5-4 – 5-5
Should you need to remove the canopy trim ring, follow
these steps:
1. Locate the tab indicators, small bumps on top of tabs.
2. Press firmly on opposite sides of the ring towards the
canopy. e tabs will flex out releasing the trim ring from
the canopy.
5-1. Holding the canopy, raise the fan off the hook.
5-2. Align the slots in the canopy with the tabs on the ceiling plate.
5-3. Raise the canopy over the ceiling plate. Rotate the canopy
clockwise until the tabs on the ceiling plate totally engage with
the slots in the canopy.
5-4. Partially install the three canopy screws into the canopy one at a
time. Once all three screws are in, tighten them.
5-5. Using both hands, push the canopy trim ring up to the top of the
canopy. e canopy trim ring will snap and lock into place.
Step 5-3
Hunter Fan Company 42639-01 • 4/5/07