Filter
Top Products
12
Installing the Glass Bowl
1. First install two B10 candelabra bulbs (60 Watt
Maximum) into the sockets.
2. Attach the extra pull chain (included) to the fan pull
chain using the plastic breakaway connector. (You may
find the plastic breakaway connector on the end of the
extra chain.)
3. read the fan pull chain through the hole in the metal
disk. en, thread the fan pull chain through the hole in
the center of the glass bowl.
4. read the light pull chain through the hole in the center
of the glass bowl.
5. Place the cover plate up against the glass bowl. Align the holes in the
cover plate and glass bowl.
6. read the fan pull chain and light pull chain through the appropriate
holes.
7. read the light pull chain through the finial and screw the finial onto
the threaded rod end until tight.
Breakaway
Connector
7 • Completing Your Installation With a Light Fixture (Continued)
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial
Hunter Fan Company 42639-01 • 4/5/07