Hunter Fan 23348 Outdoor Ceiling Fan User Manual


  Open as PDF
of 12
 
10
42664-01•06/09/08•HunterFanCompany
You must install the wall control included with this product in order to
controlthefanspeed.Onlyonewallcontrolcanbeusedtocontrolthe
fan speed.
7-1. TurncircuitbreakertothefanwallswitchOFF.
7-2. Removethewallplateandswitch.
7-3. Withthe“Up”arrowinthewallcontrolbackcoverfacingup,
connect each of the 2 household black wires to each of the 2 black
wall control wall box assembly wires with wire connectors. e
order is not important. Connect the ground wire from the wall
control to the ground wire in the wall.
7-4. Installthewallboxassemblywithscrews.
7-5. Attachyourwallplatetothecontrolwallboxassemblywith
screws.
Note: You may need a different wall plate to match your decor,
or because you have a multigang switch. If so, you can purchase a
Decora®-style switch plate at your local home center or hardware
store. Decora® is a regsitered trademark of Leviton Manufacturing
Corporation.
7-6. Slidetheroundwallcontrolknobontotheshaftstickingoutof
the wall box assembly.
7-7. Turnthecircuitbreakerbackon.
7-8.
Tooperatefan,turnthewallcontrolknobtothedesiredspeed.
Step 7-3
Step 7-2
Steps 7-4 – 7-5
Wire
Connector
Wall
Plate
Switch
Knob
Wall Box
Assembly
Shaft
Wall
Plate
7 • Installing the Wall Control
 previous next