Hunter Fan Company 42704-01 • 01/29/07
Fig. 19
Directional
Lever
UPDOWN
14
Operation And Care
1. e fan pull chain controls power to the fan. e pull chain has four settings in sequence: High,
Medium, Low and Off .
• Pull the chain slowly to change settings.
• Release slowly to prevent the chain from recoiling into the blades.
• e chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply
reinsert the chain into the connector (see Fig. 18).
2. e light pull chain controls power to the light. e pull chain has two settings: On and Off .
3. For cleaning fi nishes, use a soft brush or lint-free cloth to prevent scratching. A vacuum cleaner
brush nozzle can remove heavier dust. Remove surface smudges or accumulated dirt and dust
using a mild detergent and a slightly dampened cloth. You may use an artistic agent, but never
abrasive cleaning agents as they will damage the fi nish.
4. Clean wood fi nish blades with a furniture polishing cloth. Occasionally, apply a light coat of
furniture polish for added protection and beauty.
Fig. 18
To Reverse The Flow Of Air.
1. Move the directional lever all the way to the left side for down draft (see Fig. 19).
2. Move the directional lever all the way to the right side for up draft (see Fig. 19).
Pull Chain
Breakaway
Connector