8
ASSEMBLY
1
BAGGER SUPPORT ASSEMBLY
1. Remove the four carriage bolts indicated from the
rear guard.
2. Installthebaggermounttubefromthemountkit.
3. Remove the front carriage bolts securing the top
mount straps to the frame.
Remove
Kit Mount Strap
Nut
Hex Bolt
Mount Tube
4. Installkitmountstrapsbetweenthemounttube
and frame as shown in the illustration. The front
sideofthekitmountstrapsshouldbeontheinside
of the mower frame.
NOTE:Modelswithverticallymountedmuferwill
notusetherightmountstrap.
3. Tighten all hardware.
Nut
Flat Washers
Hex Bolts
Kit Mount
Strap