7
UNPACKING INSTRUCTIONS
• Removeallpartsandpackingmaterialsfrom
carton.
Checkcartoncontentsagainstlist.Besureall•
parts are there.
TOOLS REQUIRED
• Two½" Wrench
•
9
/16" Wrench
•
9
/16"Socketwrench
PARTS IDENTIFICATION
NOTE:Whenrighthand(RH)andlefthand(LH.)arementionedinthismanual,itmeanswhenseated
onthemowerintheoperator’sposition.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
Place motion control levers in “NEUTRAL” position. •
Set parking brake.•
Turn ignition key “OFF” and remove key.•
Make sure the blades and all moving parts have completely stopped.•
Disconnect spark plug and place wire where it cannot come in contact with plug.•
CONTAINER CONTENTS
3-Softbagcontainers 2-Weightbrackets
1 - Upper chute 4 - Bolts
3
/8-16 x 3¾
1 - Lower chute 8 - Nuts
3
/8-16, Nyloc
1 - Catcher mount 8 - Bolts
5
/16-18 x 1
1 - Cover Assembly 4 - Bolts
3
/8-16 x 3½
2 - Weight plates
COVER ASSEMBLY
BAG CONTAINERS
UPPER CHUTE
DUMP BAG
INDICATOR
CHUTE LATCH
LOWER CHUTE
LOWER CHUTE
ATTACHING
STRAPS