Honeywell L Portable Generator User Manual


 
Honeywell Portable Electrical Generator Service Manual www.honeywellgenerators.com 9-7
CARBURETOR
9.7 CARBURETOR
Fuel and its vapors are extremely flammable and explosive under certain conditions.
Refuel generator only outdoors, in a well-ventilated area.
NEVER enclose the generator in any structure.
Keep generator at least 6 feet (2 meters) away from buildings, other equipment, and combustible materials during oper-
ation.
NEVER fill fuel tank while the engine is running. Turn generator OFF and allow to cool before filling with fuel.
NEVER smoke or allow flames or sparks near the generator or where gasoline is stored.
NEVER overfill the fuel tank (there should be no fuel in the filler neck). After refueling, tighten the fuel cap securely.
Be careful not to spill fuel when refueling. Spilled fuel or fuel vapor may ignite. If any fuel is spilled, the area must be
dry before starting the engine.
Avoid repeated or prolonged contact with skin or breathing of vapor.
A—FLOAT VALVE
Check for worn valve or weak spring
before installation.
B—FLOAT
Check for smooth movement after
installation.
C—DRAIN SCREW
Clean with compressed air and check
for leaks after installation.
D—SET BOLT
Check for any sign of fuel leakage
after installation.
E—FUEL CUTOUT SOLENOID
Check continuity between the double
green wires of the solenoid valve. If
there no continuity, replace solenoid.
NOTE: Not present on HW3000 or
HW3000L models.
F—MAIN JET
Clean with compressed air before
installation.
G—MAIN NOZZLE
Clean with compressed air before
installation.
H—O-RING
Check for correct installation.
I— CARBURETOR BODY
Clean internal passages and orifices
with compressed air before installa-
tion.
WARNING
A
C
D
E
I
H
F
G
B