Filter
Top Products
4
SPECIFIC SAFETY RULES
Rotating tines can cause severe injury, keep all body parts
away from rotating tines.
Use extreme caution when reversing or pulling the
machine towards you.
Always be sure of your footing; keep a firm hold on the
handles and walk; never run.
If the tiller should start to vibrate abnormally or become
noisy, stop the motor and check immediately for the
cause. Abnormal noise is generally a warning of trou-
ble.
Keep all fasteners tight to be sure the tiller is in safe work-
ing condition.
Check that the hitch pins are fully inserted on the tine
shaft before each use.
Do not operate power equipment after it has been
dropped or damaged. Return it to your nearest authorized
servicing dealer for inspection and repair.
Stop the engine whenever you leave the tiller, or when
making any repairs or inspections.
Make sure all proper guards and other safety devices
are properly and securely attached before using this
product.
Be extremely careful when tilling in hard ground. The tines
could catch in the ground and propel the tiller forward.
Do not overload the capacity of the machine by attempt-
ing to till too deep at too fast a speed.
Inspect the area where the equipment is to be used and
remove all foreign objects.
Keep hands, feet, and other body parts away from rotat-
ing parts.
Always stop the engine and remove the spark plug wire
or disconnect from power supply before installing attach-
ments or making any adjustments.
Before storing the unit, allow the engine to cool.
When not in use, store the tiller in a dry place which is
inaccessible to children.
Save these instructions. Refer to them frequently and use
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also to
prevent misuse of the product and possible injury.