Filter
Top Products
Page 11 — English
WARNING:
Do not allow familiarity with this product to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict seri-
ous injury.
WARNING:
Always wear safety goggles or safety glasses
with side shields when operating power tools.
Failure to do so could result in objects being
thrown into your eyes resulting in possible
serious injury.
WARNING:
If any parts are damaged or missing do not
operate this product until the parts are replaced.
Failure to heed this warning could result in seri-
ous personal injury.
WARNING:
Do not attempt to modify this product or cre-
ate accessories not recommended for use with
this product. Any such alteration or modifica-
tion is misuse and could result in a hazardous
condition leading to possible serious personal
injury.
NOTE: The chain saw has been fully factory tested.
It is normal to find some slight lubricant residue
on the saw. Read and remove all hang tags and
store with the Operator’s Manual.
UNPACKING
This product has been shipped completely as-
sembled.
Carefully remove the product and any acces-
sories from the box. Make sure that all items
listed in the packing list are included.
Inspect the product carefully to make sure no
breakage or damage occurred during ship-
ping.
Do not discard the packing material until you
have carefully inspected and satisfactorily oper-
ated the product.
If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Chain Saw
Scabbard
Combination Wrench (UT10542, UT10562 &
UT10582 only)
2-Cycle Engine Lubricant
Bar and Chain Lubricant (UT10580, UT10582,
UT10585, and UT10918 only)
18 in. Replacement Chain (UT10580, UT10582,
UT10585, and UT10918 only)
Case (UT10560, UT10562, UT10580, UT10582,
UT10585, and UT10918 only)
Operator’s Manual
ASSEMBLY
OPERATION
WARNING:
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
WARNING:
Wear eye protection which is marked to comply
with ANSI Z87.1, as well as hearing and head
protection, when operating this equipment. Fail-
ure to heed this warning could result in serious
personal injury.