Filter
Top Products
Page 7
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention
measures.
Symbol Meaning
DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
Note: Advises you of additional information concerning the operation or maintenance of the equipment.
SAVE THESE INSTRUCTIONS
UT10550
Weight - No bar, chain, fuel or oil ........... 9.7 lbs. (4.4 kg)
Fuel tank volume .................................... 19.4 oz. (575 ml)
Chain oil tank volume ............................. 11.8 oz. (350 ml)
Bar length ................................................. 18 in. (457 mm)
Chain pitch .............................................. .325 in (8.3 mm)
Chain gauge ......................................... .050 in. (1.25 mm)
Drive sprocket ........................................................ 7-tooth
Engine displacement ............................. 2.75 cu. in. (45cc)
Maximum engine power ......... 2.5HP/1.9KW (9,000 RPM)
Idle engine speed ................................ 2,600 - 3,400 RPM
Fuel tank capacity .................................. 19.4 oz. (575 ml)
Oil tank capacity..................................... 11.8 oz. (350 ml)
SYMBOLS
SPECIFICATIONS
UT10570
Weight - No bar, chain, fuel or oil ........... 9.7 lbs. (4.4 kg)
Fuel tank volume .................................... 19.4 oz. (575 ml)
Chain oil tank volume ............................. 11.8 oz. (350 ml)
Bar length ................................................. 20 in. (508 mm)
Chain pitch .............................................. .325 in (8.3 mm)
Chain gauge ......................................... .050 in. (1.25 mm)
Drive sprocket ........................................................ 7-tooth
Engine displacement ............................. 2.75 cu. in. (45cc)
Maximum engine power ......... 2.5HP/1.9KW (9,000 RPM)
Idle engine speed ................................ 2,600 - 3,400 RPM
Fuel tank capacity .................................. 19.4 oz. (575 ml)
Oil tank capacity..................................... 11.8 oz. (350 ml)
UT10560
Weight - No bar, chain, fuel or oil ........... 9.7 lbs. (4.4 kg)
Fuel tank volume .................................... 19.4 oz. (575 ml)
Chain oil tank volume ............................. 11.8 oz. (350 ml)
Bar length ............................................... 16. in. (406 mm)
Chain pitch .......................................... ..0.325 in (8.3 mm)
Chain gauge ......................................... .050 in. (1.25 mm)
Drive sprocket ........................................................ 7-tooth
Engine displacement ............................. 2.75 cu. in. (45cc)
Maximum engine power ......... 2.5HP/1.9KW (9,000 RPM)
Idle engine speed ................................ 2,600 - 3,400 RPM
Fuel tank capacity .................................. 19.4 oz. (575 ml)
Oil tank capacity..................................... 11.8 oz. (350 ml)