Homelite UT10012 Chainsaw User Manual


 
4 5
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
Read The Operator’s Manual
Safety Alert
SYMBOL NAME DESIGNATION/EXPLANATION
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Precautions that involve your safety.
SYMBOLS
Wear Eye, Hearing, and Head
Protection
Wear eye protection which is marked to comply with ANSI Z87.1
as well as hearing and head protection when operating this
equipment.
Gasoline and Oil
Use unleaded gasoline intended for motor vehicle use with an
octane rating of 87 [(R + M)/2] or higher. This product is powered
by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle
oil.
Wear non-slip, heavy-duty protective gloves when handling the
chain saw.
Avoid bar nose contact.
DANGER! Beware of kickback.
Engines produce carbon monoxide which is an odorless, deadly
poison. Do not operate in an enclosed area.
Do not operate the saw using only one hand.
Hold and operate the saw properly with both hands.
No smoking, sparks, or open flame.
Wear Gloves
Bar Nose Contact
Kickback
Carbon Monoxide
One Handed
Operate With Two Hands
No Smoking
The SAFE-T-TIP nose guard on the guide bar helps prevent
kickback.
SAFE-T-TIP Nose Guard
Keep Bystanders Away Keep all bystanders and animals at least 50 ft. away.