Filter
Top Products
C 9700 ... C 9.88 H
Operating Instructions
152 145 052
General Remarks on Maintenance
• Do not run engine in enclosed spaces! Danger of
poisoning!
• To prevent the danger of fire, keep the tractor and
implements clean!
• When leaving the tractor, secure it against rolling and
unauthorized use (parking brake, chocks), stop the
engine, remove the ignition key and, if required, lock the
cabin.
• Do not leave the tractor unattended as long as the
engine is still running.
• If external current consumers are connected, eg equip-
ment with solenoid valves, protect them with diodes
against back currents. If not, the traction electronics
could be affected.
• Operate the equipment only if all guards are installed
and in position.
• Install and remove the cardan shaft only with the engine
stationary.
• When working with the PTO shaft, no-one should be
standing in the area of the rotating PTO and cardan
shaft.
• The guards for the cardan shaft and the PTO shaft must
be installed as specified.
• When the cardan shaft is removed, refit the protective
cap on the PTO shaft.
• Do not perform any welding, cutting and grinding work
on carrying and other safety-relevant parts such as
tractor frame, axles, trailer hitch, etc.
• The mounting of tires requires sufficient knowledge and
special mounting tools.
• Only use genuine spare parts or qualitatively equiva-
lent, commercially-available parts. Use the parts in the
list of maintenance parts in the chapter entitled "Mainte-
nance Data".
• Before taking into service and after servicing or repair,
the tractor and the implement must be checked for road
worthiness and operating safety.