Filter
Top Products
C 9700 ... C 9.88 H
Operating Instructions
106 145 052
Operating the Implements
Operating the Hydraulic Carrier* (Power Lifter)
1 Pressure adjuster
2 ON-OFF plate
3 Star knob for turning on/off
The hydraulic carrier allows for a weight compensation
between implement and tractor. This increases the axle load
and the climbing ability is improved. During road travel with
a lifted implement, the hydraulic system absorbs shocks
due to bumps in the road.
- Turn the star knob (3) to the left (ON position).
- Screw in the pressure adjuster (1) as far as possible.
- Raise the implement with the front lift.
- Read the pressure at the pressure gauge (4) at the
driver's station (eg 100 bar) and select the float
position.
- Screw out the pressure adjuster (1) until the pressure
gauge indicates, for example, 50 bar (implement
resting on ground). The selected pressure corre-
sponds to the carried weight.
- Lower and raise the implement with the front lift.
1
3
2
4
* Option