Hayter Mowers 616E Lawn Mower User Manual


 
10 11
Maintenance Schedule
To prevent accidents, stop the engine and disconnect
the spark plug lead before attempting to carry out
procedures on the mower.
After the very rst ve hours change the engine oil.
Follow the hourly or calendar intervals, whichever occurs
rst. More frequent service will be required if working for
prolonged periods under dusty, dry conditions, or when
airborne debris is present or after extensive operation
cutting tall, dry grass.
Daily
- Check the oil level.
- Remove grass debris from around the engine, exhaust/
exhaust guard, air ways in the top cowl, underside of
the deck housing and from the grassbag and check for
signs of damage.
- Check the condition of guards and safety devices.
- Check condition of cutterblade.
25 Hours Or Every Season
- Change the engine oil if continuously operating under
heavy load or high ambient temperature.
- Service the air cleaner.
- Lubricate wheels, pivot points and linkages and grease
the inner control cables at point of entry and exit from
their outer casing.
- Check the clutch cable adjustment.
- Sharpen the cutterblade.
50 Hours Or Every Season
Change the engine oil.
100 Hours Or Every Season
- Clean the engine cooling system. Clean more often
under dusty conditions or when airborne debris is
present or after prolonged operation whilst cutting tall,
dry grass.
- Replace the spark plug.
Engine Detail
(Refer g.20)
MAINTENANCE SCHEDULE
1. Air Cleaner
2. Primer Bulb
3. Fuel Cap
4. Start Grip
5. Cover
6. Oil ll/Dipstick
7. Exhaust Guard
8. Spark Plug / Lead
8
1
2
3
4
5
6
7
Fig. 20