Filter
Top Products
MAINTENANCE SCHEDULE
1.20
To prevent accidents stop the engine disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
Follow the hourly or calendar intervals, whichever occurs first. More
frequent service will be required if working for prolonged periods
under dusty, dry conditions, or when airborne debris is present or after
extensive operation cutting tall, dry grass.
After the very first five hours change the engine oil
Check the oil level
Remove grass debris from around the engine, exhaust/exhaust guard and
air ways in the top cowl and underside of the deck housing.
Check the condition of guards and safety devices.
Check condition of cutterblades.
Change the engine oil if continuously operating under heavy load or
high ambient temperature.
Service the air cleaner.
Lubricate wheels, pivot points and linkages and grease the inner con-
trol cables at point of entry and exit from their outer casing.
Sharpen the cutterblade.
Change the engine oil.
Clean the engine cooling system. Clean more often under dusty condi-
tions or when airborne debris is present or after prolonged operation
whilst cutting tall, dry grass.
Replace the spark plug.
25Hrs or Every Season
Daily
First 5Hrs
50Hrs or Every Season
50Hrs or Every Season
005155 (0) 28/2/05 10:34 am Page 1.20