Filter
Top Products
Page 5
SKU 95845
For technical questions, please call 1-800-444-3353
Armrest (1)
Screw (6)
FIGURE 3
Backrest (2)
Attach the Back Assembly with LED Lights (2) to the Armrest (1), right and left. Use
the four Screws (6) through the brackets on both Armrests (1) and through the Back
Assembly (2). Tighten Screws. See Figure 3.
To secure the Bench to the ground, hammer the Ground Nails (9) through the pre-drilled
holes at the base of each leg. Make sure that when hammering nails into ground that
the area is clear of any underground wires or cables.
3.
4.